Renaissance Fittings & Piping is engaged as a supplier and stockist of 5083 Aluminium Alloy Angles in India, serving structural fabricators, engineering contractors, industrial manufacturers, and procurement teams requiring corrosion-resistant and structurally reliable aluminium sections.
5083 aluminium alloy is part of the aluminium–magnesium alloy category and is commonly specified for applications where environmental exposure and mechanical performance are key considerations. As a stock-supported supplier, we coordinate supply of equal and unequal aluminium angle sections for project-based and bulk industrial requirements across India.
The grade is selected in applications where strength-to-weight efficiency and durability are important in structural design planning.
5083 Aluminium Alloy Angle Specifications
Understanding technical parameters of 5083 aluminium alloy angles supports appropriate grade selection and structural compatibility assessment.
International Standards and Designation
5083 aluminium alloy is identified under recognized international designation systems for material classification consistency.
| Standard System | Designation |
|---|---|
| Aluminium Association | 5083 |
| UNS | A95083 |
| EN | EN AW-5083 |
These references assist engineers and procurement teams in confirming material specification alignment.
Size Range and Dimensional Availability
5083 aluminium alloy angles are available in:
- Equal angle configurations
- Unequal angle configurations
Dimensional variations typically include:
- Leg length
- Section thickness
- Standard industrial supply lengths
Final dimensional selection depends on load considerations, fabrication planning, and structural application requirements. Availability may vary depending on stock and production scheduling.
Temper Conditions and Surface Finish
5083 aluminium alloy is commonly supplied in strain-hardened tempers based on structural requirements. The usual surface condition is mill finish unless specific finishing requirements are requested. Temper condition influences mechanical strength levels and fabrication response characteristics.
Chemical Composition of Aluminium Alloy 5083
The chemical composition of 5083 aluminium alloy contributes to its corrosion performance and structural capability. Magnesium is the primary strengthening element.
Primary Alloying Elements
| Element | Typical Percentage |
|---|---|
| Aluminium (Al) | Balance |
| Magnesium (Mg) | 4.0 – 4.9 |
| Manganese (Mn) | 0.40 – 1.0 |
| Chromium (Cr) | 0.05 – 0.25 |
| Iron (Fe) | ≤ 0.40 |
| Silicon (Si) | ≤ 0.40 |
| Copper (Cu) | ≤ 0.10 |
| Zinc (Zn) | ≤ 0.25 |
The alloy composition supports strength characteristics while maintaining resistance to environmental exposure.
Magnesium Content and Corrosion Resistance
Magnesium enhances the alloy’s ability to resist corrosion in moisture-prone and industrial atmospheric conditions. Suitability for specific environments should be evaluated based on project requirements.
Stability and Structural Integrity
The balanced composition supports dimensional stability during fabrication processes such as welding and forming when proper handling practices are followed.
Mechanical Properties of 5083 Aluminium Alloy Angles
Mechanical characteristics of 5083 aluminium alloy angles vary depending on temper condition. Typical reference values include:
| Property | Typical Value (Temper Dependent) |
|---|---|
| Tensile Strength | 275 – 350 MPa |
| Yield Strength | 125 – 215 MPa |
| Density | ~2.66 g/cm³ |
| Melting Range | Approx. 570 – 640°C |
Actual values may differ based on processing and temper.
Density and Thermal Characteristics
5083 aluminium alloy maintains a relatively low density compared to traditional steel materials, supporting weight reduction in structural assemblies. Thermal characteristics should be evaluated according to application design conditions.
Weldability and Fabrication Performance
5083 aluminium alloy is generally considered compatible with structural welding and forming processes. Fabrication performance depends on procedure selection and structural configuration.
Applications of 5083 Aluminium Alloy Angles in India
5083 aluminium alloy angles are utilized in a variety of industrial and structural sectors in India.
Marine and Coastal Applications
Due to its corrosion-resistant characteristics, the alloy is often considered for fabrication in moisture-exposed environments and coastal infrastructure projects.
Structural and Architectural Projects
The material is used in reinforcement structures, support assemblies, and architectural frameworks where reduced weight and durability are design factors.
Industrial Fabrication and Transportation
Applications include machinery structures, equipment frames, enclosures, and load-bearing assemblies in industrial environments.
Manufacturing Process and Stock Control
As a supplier and stockist, Renaisancep Pipe and Fitting coordinates structured inventory management to support bulk industrial demand.
Material Handling and Storage
Inventory control practices focus on maintaining dimensional integrity and traceability during storage and dispatch planning.
Dimensional Inspection
Angles are reviewed for:
- Leg length accuracy
- Thickness consistency
- Straightness
- Surface condition
Dimensional accuracy supports fabrication alignment and structural compatibility.
Packaging and Domestic Supply
For Pan India dispatch, packaging methods are coordinated to reduce transport-related handling risks. Delivery scheduling depends on order volume and logistics planning.
Bulk Supply of 5083 Aluminium Alloy Angles Across India
Renaissance Fittings & Piping supports bulk and project-based supply requirements across major industrial regions of India.
Major Industrial Cities We Serve
| Region | Cities Covered | Supply Focus |
|---|---|---|
| West India | Mumbai, Pune, Ahmedabad, Surat | Structural & Industrial Supply |
| South India | Chennai, Bengaluru, Hyderabad, Coimbatore | Fabrication & Project Orders |
| North India | Delhi NCR, Jaipur, Ludhiana, Chandigarh | Infrastructure Projects |
| East India | Kolkata, Bhubaneswar, Guwahati | Industrial Dispatch |
| Central India | Nagpur, Indore, Raipur | Bulk Structural Supply |
Other Aluminium Alloy Angles We Supply
In addition to 5083 aluminium alloy angles, Renaissance Pipe and Fitting also supplies:
- 5082 Aluminium Alloy Angles
- 6082 Aluminium Alloy Angles
- 6083 Aluminium Alloy Angles
Grade selection depends on structural performance requirements and environmental considerations.
Why Choose Renaisancep Pipe and Fitting for 5083 Aluminium Alloy Angles?
- Structured Stockist Support: Inventory coordination supports timely dispatch planning for industrial buyers and fabrication projects.
- PAN India Bulk Distribution: Supply planning is coordinated for infrastructure contractors and engineering procurement teams across India.
- Clear Technical Communication: Specification discussion and requirement review help align material selection with structural needs.
Request a Quote for 5083 Aluminium Alloy Angles
If you are evaluating 5083 Aluminium Alloy Angles Supplier and Stockist options in India, share:
- Required section dimensions
- Thickness
- Quantity
- Delivery location
Our team will review availability and provide commercial details accordingly.
Frequently Asked Questions (FAQ)
What industries commonly use 5083 aluminium alloy angles?
5083 aluminium alloy angles are used in structural fabrication, industrial assemblies, and projects where corrosion resistance and strength are important considerations.
Can 5083 aluminium alloy angles be welded?
The alloy is generally considered suitable for welding when proper fabrication procedures are followed.
Are equal and unequal angle profiles available?
Both configurations can be coordinated depending on structural design and stock availability.
Do you supply across India?
Supply coordination is supported across major industrial regions in India based on order confirmation.
How can I request pricing?
Provide size, quantity, and delivery location details to receive quotation assistance.